Georgia Tech Home PageIPST Home Page
Georgia Institute of TechnologyMaterials Science and EngineeringPaper Science and TechnologyGT MapGT DirectorySite MapWebsite Use InstructionsSearch Engine
  Main Menu

About Us
News
People
Research
Group Publications and Presentations
Links
Map
Fun Stuff

 
Peer Reviewed Journal Publications

Publications in Conference Procedings

Pulp & Paper Related Corrosion Research at IPST

Student Posters



Top of page
Top of page
Top of page
Top of page
 

Group Publications and Presentations

 

Peer Reviewed Journal Publications

 

Published Book Chapters and Parts of Books:

  1. J. A. Colwell, B. N. Leis, P. M. Singh, Crack Initiation of Line Pipe Steels in Near-Neutral pH Environments, Environment-Induced Cracking of Materials, (ed. Sergei Shipilov), Elsevier, 2006.


  2. J. J. Lewandowski and P. M. Singh. Fracture and Fatigue of DRA Composites, ASM Metals Handbook No. 19, Section 7. ASM International, Metals Park OH, 1996.


  3. J. J. Lewandowski and P. M. Singh, Toughness of DRA and Extrinsically Toughened DRA Aluminum Alloy Laminates. Intrinsic and Extrinsic Fracture Mechanisms in Inorganic Composite Systems. (W. H. Hunt and J. J. Lewandowski eds.) TMS, Warrendale PA, 1995.


  4. P. M. Singh, J. J. Lewandowski. Damage Evolution in Discontinuously Reinforced Aluminum Alloys, Intrinsic and Extrinsic Fracture Mechanisms in Inorganic Composite Systems. (W. H. Hunt and J. J. Lewandowski eds.) TMS, Warrendale PA, 1995.


  5. R. N. Parkins and P. M. Singh, The nucleation and coalescence of short cracks in cyclically loaded ferritic steel exposed to a carbonate-bicarbonate solution. Short Fatigue Cracks. ESIS 13 (ed. K. J. Miller and E. R. de los Rois) Mechanical Engineering Publications, London, UK, 1992.


  6. P. M. Singh, Simulation and Prediction of Crack Growth Controlled by Random Factors, Life Prediction of Corrodible Structures, (R. N. Parkins, ed.), NACE International, Houston TX, 1992.


  7. P. M. Singh, N. J. H. Holroyd, J. J. Lewandowski and J. T. Evans, Monte-Carlo Simulations of Lead Induced Slow Crack Growth in Al-Mg-Si Alloys, Fundamental Aspects of Stress Corrosion Cracking, (S. M. Bruemmer et.al., eds.), TMS, Warrendale PA, 1992.


 

Peer Reviewed Journal Publications:

  1. K.R. Chasse and P.M. Singh, Effect of Microstructural Anisotropy on Stress Corrosion Cracking of Hot Rolled Duplex Stainless Steel, submitted to Corrosion Engineering Science and Technology, 2012


  2. R. D. Moser, L. F. Kahn, K. E. Kurtis, P. M. Singh, High-Strength Stainless Steels for Corrosion Mitigation in Prestressed Concrete: State of the Art, submitted to ACI Journal, 2012.


  3. R. D. Moser, K. E. Kurtis, P. M. Singh L. F. Kahn, Influence of Sulfates on the Passivation Behavior of Carbon and Stainless Steels in Simulated Concrete Pore Solutions, Submitted to Cement and Concrete Composites Journal, 2012


  4. Robert D. Moser, Preet M. Singh, Lawrence F. Kahn, Kimberly E. Kurtis, Chloride-induced corrosion resistance of high-strength stainless steels in simulated alkaline and carbonated concrete pore solutions, Corrosion Science, 54(1), 2012.


  5. Huang, Fang; Singh, Preet M.; Ragauskas, Arthur J., Characterization of Milled Wood Lignin (MWL) in Loblolly Pine Stem Wood, Residue, and Bark, Journal of Agricultural and Food Chemistry, 59(24), 12910-12916. 2011.


  6. Robert D. Moser, Preet M. Singh, Lawrence F. Kahn, Kimberly E. Kurtis, Chloride-induced corrosion of prestressing steels considering crevice effects and surface imperfections, corrosion, Corrosion Journal, Vol. 67, No. 6, p065001. 2011.


  7. Kevin R. Chasse and Preet M. Singh, Hydrogen Embrittlement of a Duplex Stainless Steel in Alkaline Sulfide Solution, Corrosion Journal, Vol. 67, No. 1, pp 015002-1-12. 2011.


  8. Xiaoyuan Lou, Preet M. Singh. Cathodic activities of oxygen and hydrogen on carbon steel in simulated fuel-grade ethanol.  Electrochimica Acta, 56(5), 2312-2320. 2011.


  9. Xiaoyuan Lou, Preet M. Singh. Phase angle analysis for stress corrosion cracking of carbon steel in fuel-grade ethanol: Experiments and simulation. Electrochimica Acta, 56(4),  1835-1847, 2011.


  10. Ananya Bhattacharya,; Preet M Singh, Electrochemical behaviour of duplex stainless steels in caustic environment. Corrosion Science, 53(1), 71-81. 2011.


  11. Xiaoyuan Lou, Preet M. Singh.  Role of water, acetic acid and chloride on corrosion and pitting behaviour of carbon steel in fuel-grade ethanol. Corrosion Science, 52(7), 2010.


  12. Xiaoyuan Lou, Di Yang, Preet M. Singh, Film Breakdown and Anodic Dissolution during Stress Corrosion Cracking of Carbon Steel in Bioethanol, Journal of The Electrochemical Society, Vol. 157, No.2,  C86-C94, 2010.


  13. Xiaoyuan Lou, Di Yang, Preet M. Singh, Effect of Etahnol Chemistry on Stress Corrosion Cracking of Carbon Steel in Fuel-Grade Ethanol, Corrosion, Vol. 65, No. 12, 2009.


  14. Preet M. Singh, Vikas R. Behrani, Jamshad Mahmood,  Corrosion of carbon steel tubes in the mid-furnace of kraft recovery boilers - environment characterization.  Tappi Journal, 8(4), 23-29. 2009.


  15. Ananya  Bhattacharya, Preet. M. Singh,   Effect of Heat Treatment on Corrosion and Stress Corrosion Cracking of S32205 Duplex Stainless Steel in Caustic Solution.    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 40A(6),  1388-1399. 2009.


  16. S. L. Asher, P. M. Singh, P. M.   Role of stress in transgranular stress corrosion cracking of transmission pipelines in near-neutral pH environments.  Corrosion, 65(2), 79-87, 2009.


  17. Omar Hatamleh, Preet M. Singh, Hamid Garmestani.   Corrosion susceptibility of peened friction stir welded 7075 aluminum alloy joints.    Corrosion Science, 51(1),  135-143. 2009.


  18. Omar Hatamleh, Preet M. Singh, Hamid Garmestani. Stress Corrosion Cracking Behavior of Peened Friction Stir Welded 2195 Aluminum Alloy Joints.    Journal of Materials Engineering and Performance 18(4),  406-413. 2009


  19. Vikas R. Behrani and Preet M. Singh, Fluctuating Sulfidizing-Oxidizing Environments and Its Effect of Stability of Protective Scales, Corrosion, 883-890, 64 (12), 2008.


  20. Ananya Bhattacharya and Preet M. Singh, Effect of heat treatment on corrosion and Stress Corrosion Cracking of 2205 and 2101 duplex stainless steels in caustic solutions, Corrosion. Vol. 64, (6), pp532-540, 2008.


  21. Yunqiao Pu, Dongcheng Zhang, Preet M. Singh, and Arthur J. Ragauskas, The New Forestry BioFuels Sector, Biofuels, Bioproducts & Biorefining  2, No. 1,  58-73, 2008.


  22. Ananya Bhattacharya and Preet M. Singh, Stress Corrosion Cracking of Welded 2205 Duplex Stainless Steel in Sulfide-Containing Caustic Solution, Journal of Failure Analysis and Prevention, Vol. 7, No. 5, pp 371-377, 2007.


  23. Dong Ho Kim, Yunqiao Pu, Richard P. Chandra, Thomas J. Dyer, Arthur J. Ragauskas, Preet. M. Singh, A Novel Method for Enhanced Recovery of Lignin from Aqueous Process Streams, Journal of Wood Chemistry and Technology. 27:3, 219-224, 2007.


  24. Preet M. Singh, Jamshad Mahmood, Stress Assisted Corrosion of Waterwall Tubes in Recovery Boiler Tubes: Failure Analysis, Journal of Failure Analysis and Prevention, Vol. 7, No. 5, pp 361-370, 2007.


  25. Stefanie L. Asher, Brian N. Leis, Jeffery A. Colwell, Preet M. Singh, Investigating a Mechanism for Transgranular Stress Corrosion Cracking on Buried Pipelines in Near-Neutral pH Environments, Corrosion, Vol. 63, (10),  pp 932-939, 2007.


  26. Dong Yang, Preet M. Singh, Richard W. Neu, Initiation and Propagation of Stress-Assisted Corrosion (SAC) Cracks in Carbon Steel Boiler Tubes, Journal of Engineering Materials and Technology, 129(4),  pp 559-566, 2007.


  27. Preet M. Singh, Adolfo Anaya, Effect of Wood Species on Corrosion Behavior of Carbon Steel and Stainless Steels in Black Liquors, Corrosion Science, 49, No.2, pp 497-509, 2007.


  28. Ian Harrison, Thomas R. Kurfess, Edwards J. Oles, Preet M. Singh, Inspection of White Layer in Hard Turned Components Using Electrochemical Methods, Journal of Manufacturing Science and Engineering, Vol. 129, No. 2, pp 447-452,April 2007.


  29. M. Trexler, T.H. Sanders, P. M. Singh, Automation of a McBain-Bakr Type Thermogravimetric Analyzer (TGA), Using a Digital Image Correlation Technique. Review of Scientific Instruments, Vol. 77, No. 2, pp 025103/1-025103/4, Feb. 2006.


  30. Patrick E. Hazlewood, Preet M. Singh and Jeffery S. Hsieh, Corrosion Prediction for Carbon Steel in Sulfide Containing Caustic Solutions. Ind. & Engr. Chem. Res., 45, No.23, pp 7789-7794, 2006.


  31. Patrick E. Hazlewood, Preet M. Singh and Jeffery S. Hsieh, The Role of Wood Extractives in Black Liquor Corrosivity, Corrosion, 62, No.10, pp 911-917, Oct. 2006.


  32. Patrick E. Hazlewood, Preet M. Singh and Jeffery S. Hsieh, Effect of Black Liquor Oxidation on the Stress Corrosion Cracking Susceptibility of Selected Materials, Corrosion, Vol. 62, No. 9,  pp 765-772, Sept. 2006.


  33. Preet M. Singh, Jorge J. Perdomo, Jamshad Mahmood, Pablo Conde, Stress Assisted Corrosion Simulation in Laboratory. Power Plant Chemistry, Vol. 7, pp 155-161, March 2005.


  34. Jorge J. Perdomo and Preet M. Singh, Environmentally Assisted Cracking of a Paper Machine Duplex Stainless Steel Suction Roll Material, Journal of Failure Analysis and Prevention, Vol. 4(2), pp 57-62, April 2004.


  35. Preet M. Singh, Jorge J. Perdomo, J. Mahmood, Julian Oteng, Stress Corrosion Cracking and Corrosion Fatigue of Duplex Stainless Steels in White Water Environments, Corrosion, Vol. 60, No. 9, Sept. 2004.


  36. Gustaf Bäck and Preet M. Singh, Susceptibility of Stainless Steel Alloys to Crevice Corrosion in Chlorine Dioxide Bleach Plants, Corrosion Science,  46(9), 2159-2182, Sept. 2004.


  37. Preet M. Singh and Safaa J. Al-Hassan, Corrosion in Lower Furnace of Kraft Recovery Boilers-In-situ Characterization of Corrosive Environments, TAPPI Journal. Vol. 87, No. 2, 2004.


  38. Preet M. Singh, O. Ige, Jamshad Mahmood, Stress corrosion cracking of 304L stainless steel in sodium sulfide containing caustic solutions, Corrosion, Vol. 59, No. 10, pp 843-850, Oct. 2003.


  39. Camille Y. Jones, Gang Chen, Sheng Dai and Preet M. Singh, Solubility in the NaOH-Na2CO3-Na2SO4-Na2SO3-Na2S2O3-Na2S-H2O System, a Simulated Black Liquor Recovery Boiler Smelt, Ind. & Engr. Chem. Res. 42(18), 4228-4233, 2003.


  40. Jorge J. Perdomo and Preet M. Singh, Electrochemical Noise (ECN) Measurements as a Corrosion Monitoring Tool. Corrosion Reviews, Vol. 20, No. 5, pp 360-378, 2002.


  41. Jorge J. Perdomo and Preet M. Singh, Corrosion Fatigue of Heat Treated Duplex Stainless Steels in Paper Mill White Waters. Corrosion Reviews, Vol. 20, No. 4, pp 295-316, 2002.


  42. J. R. Keiser, D. L. Singbeil, G. B. Sarma, K. A. Choudhury, P. M. Singh, C. R. Hubbard, R. W. Swindeman, T. M. Ely, J. R. Kish, E. A. Kenik, P. J. Maziasz, and S. E. Bailey, Comparison of cracking in recovery boiler composite floor and primary air port tubes,  TAPPI Journal, Vol. 85, No.2, February 2002.


  43. Keiser, J. R., Sarma, G. B., Wang, S-L., Hubbard, C.R., Swindeman, R.W., Singbeil, D. L., Singh, P. M. Why Do Kraft Recovery Boiler Composite Floor Tubes Crack? TAPPI Journal, Vol. 84, p 48, August 2001.


  44. Greg Fonder, Safaa Al-Hassan, and Preet M. Singh, Corrosivity Monitoring Database for Kraft Recovery Boilers, PaperAge, pp 34-37, October 2000.


  45. M. Estes, M. Marek, P. M. Singh, A. Rudie, J. Colwell, Corrosion of Composite Tube Air-Ports in Kraft Recovery Boiler: Cr2O3, Fe2O3, NiO Solubility in Molten Hydroxide, P&P Canada, 100:12, pp106-109, 1999.


  46. S. Al-Hassan, G. J. Fonder, P. M. Singh, The Effect of Temperature Excursion on Sulfidation of Carbon Steel in 1% H2S Environment, P&P Canada, 100:10, 1999.


  47. P. M. Singh and J. J. Lewandowski,  Stress Corrosion Cracking of Discontinuously Reinforced Aluminum (DRA) 2xxx Alloys during Slow Strain Rate Testing, J. Mat. Sci. Letters, Vol. 15, pp 490-493, 1996.


  48. P. M. Singh and J. J. Lewandowski, Effects of Heat Treatment on Stress Corrosion Cracking of Discontinuously Reinforced Aluminum (DRA) 7xxx Alloys during Slow Strain Rate Testing, Scripta Metall et Mat., Vol. 33, No. 9, pp 1393-1399, 1995.


  49. P. M. Singh and J. J. Lewandowski, The Effects of Reinforcement Additions and Heat Treatment on the Evolution of Poisson Ratio during Straining of Discontinuous Reinforcement Aluminum Alloys, Metall. Trans A. Vol. 26A, pp 2911-2921, Nov. 1995.


  50. T. M. Osman, P. M. Singh, J. J. Lewandowski, Crack Bridging in a Laminated Metal Matrix Composite, Scripta Metall et Mat., Vol. 31, No. 5, pp 607-612, 1994.


  51. P. M. Singh, J. J. Lewandowski, Poisson Ratio Measurements for an Al-Based Metal Matrix Composite during Elastic and Plastic Deformation, Scripta Metall et Mat., Vol. 29, pp 199-204, July 1993.


  52. P. M. Singh, J. J. Lewandowski, Effects of Heat Treatment and Reinforcement Size on Reinforcement Fracture during Tension Testing of a SiCp Discontinuously Reinforced Aluminum Alloy, Metall. Trans A. Vol. 24A, pp 2531-2543, Nov. 1993.


  53. P. M. Singh, J. T. Evans, N. J. H. Holroyd, Strain Concentration at Grain Boundaries in Al-Mg-Si Alloys, Material Sc. and Engg., Vol. A 158, pp 1-8, 1992.


  54. J. D. Rigney, P. M. Singh, J. J. Lewandowski, Environmental Effects on Ductile-Phase Toughening in Nb5Si3-Nb Composites, J.O.M., Vol. 44, pp 36-41, Aug. 1992.


  55. J. Congleton, B. Hemsworth, R. N. Parkins and P. M. Singh, Effect of heat treatments on the stress corrosion cracking of alloy 600 in high temperature waters, Nuclear Engineering and Design, Vol. 132, pp 119-132, 1991.


  56. R. N. Parkins and P. M. Singh, Stress Corrosion Crack Coalescence. Corrosion, Vol. 46, p 485, June 1990.


  57. P. M. Singh and S. N. Malhotra, Stress Corrosion Cracking of Austenitic Stainless Steels in Polythionic Acids, Corrosion, Vol. 43, p 26, January 1987.
  Georgia Tech Home Page